Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > PUSH FIT FITTINGS
Sort By:
Go
Page of 4
TOOL REMV 1/2IN PFIT DEMOUNT CLIP SHARKBITE 3/4IN CLIP DEMOUNT SHARKBITE 1/2IN
aqua-dynamic Push-Fit Removal Tool, 1/2 in Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in. Need to make a change to an installed SharkBite? fitting or remove it. Disassembly is fast and easy using the disconnect clip. This product is available in a variety of sizes ranging from 1/4 to 1 in.
CLIP DEMOUNT SHARKBITE 1IN TOOL REMV 3/4IN PFIT ADAPT PP 1/4IN ODX1/4IN FPT
Allows for easy removal of universal brass push-to-connect fitting from pipe. aqua-dynamic Push-Fit Removal Tool, 3/4 in Boshart Pipe Adapter, Nominal Size: 1/4 in, FPT Connection, 100 psi, Operating Temperature: 150 deg F, Polyethylene, White
ELL PP 90DEG 1/4INODX1/8IN MPT ADAPT PP 1/4IN ODX1/4IN MPT ADAPT PP 1/4IN ODX3/8IN MPT
Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Boshart Pipe Adapter, Nominal Size: 1/4 in, MPT Connection, 100 psi, Operating Temperature: 150 deg F, Polyethylene, White Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing.
ELL PP 90DEG 1/4INODX1/4IN MPT CAP END POLY 1/2IN BLU COUPLING PIPE FTG 1/2IN POLY
Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. The twist and lock system combines push-fit and compression fitting systems. Boshart Tube Coupling, Nominal Size: 1/2 in, Polyethylene
ELL PP 90DEG 1/4IN POLY COUPLING PIPE FTG 1/4IN POLY COUPLING PIPE FTG 3/8IN POLY
Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations.
ADAPT 3/8X1/2IN YELXBLU POLY SUPP TB 1/4IN POLY GRN SUPP TB 3/4IN POLY RED
The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations. Boshart Replacement Tube Support, Nominal Size: 1/4 in, 250 psi, Operating Temperature: 74 deg F, Polyethylene, Green Boshart Replacement Tube Support, Nominal Size: 3/4 in, 250 psi, Operating Temperature: 74 deg F, Polyethylene
ELL PP 90DEG 3/8INODX1/4IN MPT ELL PP 90DEG 3/8INODX3/8IN MPT TEE REDUC 3/8X3/8X1/8IN POLY
Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Boshart Pipe Tee, Nominal Size: 3/8 x 1/8 in, 250 psi, Polyethylene
ELL PP 90DEG 1/2IN BLU POLY ADAPT PP 3/8IN ODX1/4IN MPT ADAPT PP 3/8IN ODX3/8IN MPT
Boshart Tube Elbow, Nominal Size: 1/2 in, Angle: 90 deg, Polyethylene, Blue Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing. Plastic quick connect fittings are designed for use in POU installations, water dispensing, filtering systems, food or beverage service, agricultural or irrigation. These fittings provide a quick and convenient assembly solution saving time and expense. They do not require crimp tools, adhesives or clamps and can be removed and reused without damaging the pipe. Tube supports are sold separately and are recommended for use with soft tubing and hot liquids. They have excellent resistance to most organic compounds, industrial chemicals and gases. Plastic quick connect fittings can be used on PVC, polyethylene, PEX and copper tubing.
ADAPT PP 3/8IN ODX1/2IN MPT CAP END POLY 3/4IN RED CPLG PP 1/2X3/8IN POLY
Boshart Pipe Adapter, Nominal Size: 3/8 x 1/2 in, OD x MPT Connection, 250 psi, Acetal Copolymer The twist and lock system combines push-fit and compression fitting systems. The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations.
CPLG REDUC POLY 3/8X1/4IN ADAPT 3/8X1/2IN YELXBLU POLY ELL 90DEG 1/2IN BLU POLY
Boshart Reducing Pipe Coupling, Nominal Size: 3/8 x 1/4 in, 250 psi, Polyethylene The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations. The twist and lock system is designed for residential and commercial plumbing and suitable for cold and hot potable water supply systems only. These all white fittings have color coded rings for easy recognition of size and easy verification of lock/unlock status at a distance. They are removable and re-useable without damage to plumbing or fittings. Integral tube support for pex installations.