Home > ELECTRICAL > SPECIALTY ELECTRICAL > FIRE/HOME PROTECTION > CARBON MONOXIDE DETECTORS
Sort By:
Page of 1
ALRM CRBN MONOX WHT BATT OPRTD DETECT CRBN MONOXIDE WHT ALRM DIG WHT 13X7.5X4CM
Kidde 900-0233 (model KN-COB-B-LS-CA) is a 3AA, battery operated carbon monoxide alarm that uses electrochemical sensing technology to protect you and your family from the dangers of carbon monoxide. The battery operated CO alarm provides continuous monitoring of CO levels and includes multiple mounting options allowing installation on a wall or tabletop. The 900-0233 is suitable for all living areas and has a 10 years limited warranty. The Kidde C3010-CA is a 10 year sealed battery, carbon monoxide alarm that uses electrochemical sensing technology to protect you and your family from the dangers of carbon monoxide. The C3010-CA alarm will automatically activate when it is attached to the mounting bracket. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. A screwdriver can be used to deactivate the unit, stopping the end-of-life chirp and making it safe for disposal. The Kidde 900-0230 (model KN-COPP-B-LS-CA) is a 3AA, battery operated carbon monoxide alarm which includes a digital display feature and uses electrochemical sensing technology to protect you and your family from the dangers of carbon monoxide. The battery operated CO alarm provides continuous monitoring of CO levels and includes multiple mounting options allowing installation on a wall or tabletop. The 900-0230 is suitable for all living areas and has a 10 years limited warranty.
ALRM SMK/CRBN MONOX WHT BATT ALARM SMOKE/CO PHOTOELEC BATT DETECT CRBN MONOXIDE WHT
The Kidde 900-0220CA (Model KN-COSM-BACA) combination carbon monoxide and smoke alarm provides two important safety devices in a single unit. This alarm includes a voice warning system that announces fire, carbon monoxide, low battery and Smart Hush? activation. The voice alarm eliminates any confusion and clearly warns you and your family of a smoke or carbon monoxide danger or if your battery is in need of replacement. This technologically advanced combination alarm is battery operated protecting you and your family even during a power outage when many incidences occur. The 900-0220CA is an easy to install alarm that is suitable for all living areas and has a 10 years life and a 10 years limited warranty. This alarm uses ionization sensing technology. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. The Kidde front-loading smoke and carbon monoxide alarm (part# CP9000CA) offers protection from two hazards, fire and CO in one unit. This 9 V battery powered alarm emits a beeping tone followed by a voice warning that clearly announces the danger by saying, Fire or Warning, Carbon Monoxide. The uniquely designed front-loading battery compartment makes battery replacement quick and easy and ensures proper installation. Manufactured with a photoelectric sensor for detecting smoke and fire, this alarm also includes the world's most accurate CO sensing technology based on claims by major manufacturers. The Kidde C3010-D-CA is a 10 years sealed battery, carbon monoxide alarm which includes a digital display feature and uses electrochemical sensing technology to protect you and your family from the dangers of carbon monoxide. The C3010-D-CA alarm will automatically activate when it is attached to the mounting bracket. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. A screwdriver can be used to deactivate the unit, stopping the end-of-life chirp and making it safe for disposal.
ALARM CO DIGITAL WHITE PLUG IN DETECT CRBN MONOXIDE WHT ALRM SMK & CRBN MONOXIDE WHT
The Kidde 900-0076 (Model KN-COPP-3) is a 120 VAC powered, plug-in carbon monoxide alarm with battery backup and a digital display. The KN-COPP-3 is an easy to install unit that provides reliable protection against the dangers of carbon monoxide. The 900-0076 will detect and store measured data of concentrated CO levels as low as 11 and up to 999 PPM with its peak level memory display. This alarm gives you several mounting options, including direct-plug, a 6 ft power cord or table top. The Kidde P3010CUCA is a 10 year, sealed battery, smoke and carbon monoxide alarm that features photoelectric and electrochemical sensing technology with a Hush? feature and a voice warning to help identify the danger. The alarm will automatically activate when it is attached to the mounting bracket, there are no pull-tabs, no switches, everything is automatic. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The customer can use a simple tool such as a screwdriver to deactivate the unit, stopping the chirp and making it safe for disposal. This smoke alarm uses photoelectric sensing technology. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help ensure maximum detection of the various types of fires that can occur within the home. The Kidde KN-COSM-IBACA uses breakthrough technology to offer a fast response to real fires, including smoldering and fast flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm's overall performance in all fires and significantly reduces the potential for a nuisance alarm. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms.
ALARM SMOKE/CO HARDWIRE W/BBU ALRM CRBN MONOXIDE NTL LP ALARM COMBO 120V HARDWIRE
The Kidde front-loading smoke and carbon monoxide alarm (part # 900-0213CA) offers protection from two hazards fire and CO in one unit. This AC-wire with battery backup alarm emits a beeping tone followed by a voice warning that clearly announces the danger by saying, fire or warning carbon monoxide. The uniquely designed front-loading battery compartment makes battery replacement quick and easy and ensures proper installation. Manufactured with photoelectric sensors for detecting smoke and fire, this alarm also includes the world's most accurate CO sensing technology based on claims by major manufacturers. The Kidde 900-0113 (Model KN-COEG-3) is a 120 VAC powered, plug-in carbon monoxide, propane and natural gas alarm with battery backup and a digital display. The 900-0113 is an easy to install unit that provides reliable protection against the dangers of carbon monoxide. The gas sensor is a metal oxide sensor designed to detect natural gas (methane) or propane. The 900-0113 will detect and store measured data of concentrated CO levels as low as 11 and up to 999 PPM with its peak level memory display and will also display gas if it has detected natural gas or propane. This alarm gives you several mounting options, including direct-plug, a 6 ft power cord or table top. The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm that contains a 10-year, sealed battery backup. This alarm uses breakthrough technology to offer a fast response to real fires, including smoldering and fast-flaming, as well as protect you from carbon monoxide and dramatically reduce the chance of nuisance alarms. The Intelligent sensor technology combines the detection capabilities of an ionization smoke sensor which is more likely to detect smaller, less visible fire particles, like those produced by flaming fires with that of an electrochemical sensor, which is used to detect CO. Since carbon monoxide is present in all fires, having both detection chambers work together in one alarm is a breakthrough in the fire safety industry. When either sensor notices a potential hazard, it will communicate with the other. Depending on what is detected, the alarm will adjust its smoke sensitivity in order to better discriminate between a real hazard and a false one. This constant communication enhances the alarm's overall performance in all fires and significantly reduces the potential for a nuisance alarm. Leading authorities recommend that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fires that can occur within the home. Ionization sensing alarms may detect invisible fire particles (associated with fast flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible fire particles (associated with slow smoldering fires) sooner than ionization alarms. The i12010SCO contains a 10 years tamper proof backup battery that eliminates the need for battery replacement and ends worry over unauthorized battery removal. The alarm provides continuous protection from smoke, fire and carbon monoxide, even during power outages. At the end of alarm life, the unit will chirp, indicating the alarm is in need of replacement. The end of life chirp can be temporarily silenced, allowing for replacement at a more convenient time.