Home > HARDWARE > CONSTRUCTION HARDWARE > VENTILATION PRODUCTS > ROOF VENTILATORS
Sort By:
Page of 2
ROOF VENT 50SQIN GRAY SQ TOP  6075G  GREY #075 ROOF VENT SQU 6065G ROOF VENT SLANT BACK
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene. Installed on a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak. Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene.
ROOF VENT WEATHER WOOD 61SQIN ROOF VENT 61 SQIN BLK SLANT BK ROOF VENT 61 SQIN BRW SLANT BK
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene. Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene. Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17-1/2 in x 18-1/2 in flashing with 4.3 in H. 61 sq-in of net-free area. UV resistant polypropylene.
ROOF LOUVER BLACK SQUARE TOP  ROOF VENT 50SQIN BROWN SQ TOP ROOF VENT 50SQIN WTHR WOOD SQ
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene. Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene. Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene.
ROOF VENT 75SQIN BROWN SQ TOP ROOF VENT 75SQIN BLACK SQ TOP 60PRO50WW WEATHERWOOD 50 SQ. I
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene. Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant polypropylene. Installed on a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak. With the WeatherPRO? Series PRO50 you no longer need to worry about foul weather. The unique baffle system within the WeatherPRO? Series PRO50 wards off driving snow and blistering rain.
ROOF VENT 50 SQ IN GRAY       ROOF VENT 50 SQ IN BROWN      ROOF VENT 50 SQ IN BLACK
With the WeatherPRO? Series PRO50 you no longer need to worry about foul weather. The unique baffle system within the WeatherPRO? Series PRO50 wards off driving snow and blistering rain. With the WeatherPRO? Series PRO50 you no longer need to worry about foul weather. The unique baffle system within the WeatherPRO? Series PRO50 wards off driving snow and blistering rain. With the WeatherPRO? Series PRO50 you no longer need to worry about foul weather. The unique baffle system within the WeatherPRO? Series PRO50 wards off driving snow and blistering rain.
6001WW WEATHERWOOD 117 SQ. INC ROOF VENT BLACK TURBINE REPL  ROOF VENT GRAY TURBINE REPL
Duraflo Replacement Turbo Turbine Ball, Polypropylene, Weather Wood, 18 in OAW, 10 in OAH, Throat Diameter: 12-1/4 in Installed on an existing base from a whirly bird or turbine vent, both 12 or 14 in. Intended for a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak. Installed on an existing base from a whirly bird or turbine vent, both 12 or 14 in. Intended for a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak.
ROOF VENT BROWN TURBINE REPL  Ventilation Maximum 300 Slope Roof Ventilator GAF Master Flow AIC12 Internal Braced Rotary Turbine Ventilator
Installed on an existing base from a whirly bird or turbine vent, both 12 or 14 in. Intended for a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak. The model VMAX-302-12 has been designed for slope roof application and is compatible with most all types of roofing membrane including metal. It has no moving parts, requires no electricity and is completely silent and maintenance free. Built tough to endure the harshest weather conditions that nature has to offer including hail storms. It sits high enough off the roof deck to allow it to weather through snow accumulations without being covered, thus, finally giving the home owner a peace of mind. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
Ventilation Maximum 300 Slope Roof Ventilator GAF Master Flow GC12E External Braced Rotary Turbine Ventilator GAF Master Flow GIC12WW Internal Braced Rotary Turbine Ventilator
The model VMAX-302-12 has been designed for slope roof application and is compatible with most all types of roofing membrane including metal. It has no moving parts, requires no electricity and is completely silent and maintenance free. Built tough to endure the harshest weather conditions that nature has to offer including hail storms. It sits high enough off the roof deck to allow it to weather through snow accumulations without being covered, thus, finally giving the home owner a peace of mind. Galvanized construction, externally braced for added strength. Heavy-duty construction ideal for coastal and high wind areas. Simple, two-piece assembly for faster installation. Permanently lubricated dual bearing system for long-lasting performance. Stainless steel ball bearings. 720 cfm air movement. No.GC12E Dade County Approved 02-0524.03. Nos.GC12EF and GC12EWWF Florida Building Code (FBC) Approved FL5027. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
ROOF VENT BRW ADJUSTABLE BASE GAF Master Flow GIC12 Internal Braced Rotary Turbine Ventilator GAF Master Flow AIC14BL Internal Braced Rotary Turbine Ventilator
The PROTurbo combines the field tested benefits of the patented WeatherPRO internal baffle system with multi-stage, high volume, airflow for superior attic ventilation. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved. Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved.
GAF Master Flow AIC14WW Internal Braced Rotary Turbine Ventilator VENT ROOF PRO TURBO GREY 117IN 102-12-MB-N BLACK 12IN X 12IN
Permanently lubricated track system, upper and lower stainless steel ball bearings prevents metal-to-metal contact, encased to help prevent dirt, dust, sand and other foreign materials from damaging bearings for long life, less friction, smoother spin and wear resistance. Heavy-duty steel spider braces and case-hardened steel shaft for long-lasting strength/durability. Simple, mechanically-locked, two-piece head/base for faster, easier installation. Pre-punched bottom/crimped collar of one-piece base fits tighter, makes installation easier and allows for adjustability up to 12/12 pitch without removing turbine. Extra-large flashing and head with included bottom ring for easier installation and better weather protection. Double ribbed vanes, with convex top, direct even wind-driven rain away from the unit. Dade County/Texas Department of Insurance approved. Installed on a sloped, shingled roof to ventilate hot, moist attic air as a part of a balanced ventilation system. Installed within 24 in of the roof's peak. The PROTurbo combines the field tested benefits of the patented WeatherPRO internal baffle system with multi-stage, high-volume, airflow for attic ventilation. Unlike the turbine, the maximum ventilators are CSA approved and do not require to rotate to prevent water or snow infiltrations. Its unique storm proof system prevents infiltrations while at the same time capturing the wind flow from all directions and at wind velocities as low as 6 km/hr. With this combination of technology, wind and pressure differentials, a "chimney or, vacuum effect" results in drawing the stale air and moisture out, thus preventing moisture and heat build-up within the attic space. All in one, no need of a wood curb, this model has been designed to allow you to install the roofing membrane onto the base flashing the same way you would a wood curb. We have made an allowance for the membrane so that the neck of the ventilator will go over both the flashing and the membrane.